Technical Data - Conrad 552926 Bedienungsanleitung

b) Unpairing
1. Make sure the outlet strip is connected to a proper mains outlet of 230 V/AC. If the POWER (RF control)
LED lights up, switch it off by pressing the ON/OFF switch next to it.
2. Press and hold the ON/OFF switch, until the POWER (RF control) LED blinks slowly.
3. Release the ON/OFF switch. Then press and hold the ON/OFF switch again until the POWER (RF control)
LED blinks rapidly.
4. Press the ON/OFF switch again and the POWER (RF control) LED will go off. The outlet strip and the foot
switch will be unpaired.
Disposal
a) Product
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product according to the relevant statutory regulations.
Remove any inserted (rechargeable) batteries and dispose of them separately from the product.
b) (Rechargeable) batteries
You as the end user are required by law (Battery Ordinance) to return all used batteries/rechargeable
batteries. Disposing of them in the household waste is prohibited.
Contaminated (rechargeable) batteries are labelled with this symbol to indicate that disposal
in the domestic waste is forbidden. The designations for the heavy metals involved are: Cd =
Cadmium, Hg = Mercury, Pb = Lead (name on (rechargeable) batteries, e.g. below the trash
icon on the left).
Used (rechargeable) batteries can be returned to collection points in your municipality, our stores
or wherever (rechargeable) batteries are sold.
You thus fulfil your statutory obligations and contribute to the protection of the environment.

Technical data

Outlet strip
Input voltage ........................... 230 V/AC, 50 Hz
Input current ........................... max. 16 A
Input power ............................. max. 3680 W
Cable length ........................... 1.5 m
Number of sockets .................. 2 continuous, 4 switchable
Dimensions (L xW x H) ........... 446 x 62 x 42 x mm
Weight .................................... 630 g
Foot switch
Operating voltage ................... 3 V/DC, battery type CR2032
Current consumption .............. max. 6 mA
Frequency ............................... 433.92 MHz
Power ..................................... max. 15 dBm
Transmission range ................ max. 20 m
Weight .................................... 55 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
(www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming,
or the capture in electronic data processing systems require the prior written approval by the editor.
Reprinting, also in part, is prohibited. This publication represent the technical status at the time of
printing.
© Copyright 2016 by Conrad Electronic SE. V2_0516_02_JC