H) Harmonic Distortion (Harmonic Content) - VOLTCRAFT VC731 Bedienungsanleitung

h) Harmonic Distortion (Harmonic Content)

• Move the setting wheel (7) to the icon for voltage measurement "
measurement "
current measurement in chapter 11. c) and 11 j).
• To measure the harmonic distortion (only possible at AC mode), select the symbol "
with the navigation joystick (5). Confirm your selection by pushing the navigator joystick
("ENTER").
• Terminate this mode by pushing the navigation joystick for at least 2 seconds ("ENTER").
• The LC display indicates the value.
" (VC732) or " " (VC731). Observe the information on voltage/
" or current
"
59