Panasonic ER-GN30 Bedienungsanleitung Seite 7

4
4
Cutthehairbymovingitslowlyagainstthegrowth
ofthehair.
•
The outer blade surface may get a little warm during use, but
performance will not be affected.
Clean
Cleaningyourtrimmer
There are 3 ways to clean the appliance: "Jet wash cleaning",
"Water wash cleaning", and "Brush cleaning".
It is recommended to clean at every use.
Waterwashcleaning
Notes
•
Do not use kitchen detergents, bathroom cleaner, toilet
detergents, or hot water. Doing so may result in malfunction.
•
The battery cover should not be taken apart as this can affect
the watertight construction of the appliance.
1. Wet the outer blade with water,
and apply hand soap or
cleaning fluid (optional).
. Slide the power switch to the "1"
position, and let it foam for
approximately 10 seconds.
▼
Jet wash cleaning
3. Align the wash switch ring to
" ".
•
The water outlet (a)
opens.
3
▼
▼
Water wash cleaning
3. Slide the power switch to the
"0" position and remove the
blade.
3
▼
2