Technical Data - Renkforce 1013329 Bedienungsanleitung

Cleaning
• Disconnect the product from the computer and from the power supply (disconnect
the power supply unit) before cleaning it.
• Use a clean, dry soft cloth for cleaning. Do not use any aggressive cleaning agents
as these may result in discoloration of the housing.
Tips & Notes
• USB2.0 devices are backwards compatible. This means that the USB2.0 integrated
in the hard disk drive can also function with conventional "slow" USB1.1 ports, but
then only at the maximum USB1.1 speed (effective max. ca. 1 MByte/s).
With USB2.0 several MBytes/s are possible, depending on the motherboard/PC.
• Always treat hard disks with care. Impacts during operation (also for a few seconds
after switching off) may cause the write/read head to touch the magnetic disk,
which destroys the hard disk!
Therefore, wait at least 30 seconds after turning off the docking station before
extracting the hard disk.
• Do not move the docking station/hard disk drive when it is switched on.
• The docking station must be placed on a stable surface free from vibrations.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste.
At the end of its service life, dispose of the product according to the
relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the
environment.

Technical data

a) Docking station
Suitable for . ..........................................SATA, 6.35 cm/2.5";
System requirements .........................Windows® 98SE / ME / 2000
Cable length .........................................1.5 m (USB cable)
Operating condition ............................0 to +70 ºC, 10 – 90 % RH
Storage conditions..............................-10 to +75 ºC, 5 – 95 % RH
Dimensions (W x H x D)......................141 x 63.5 x 91 mm
Weight . ..................................................600 g
b) Power supply unit
Input voltage/-current ........................100 – 240 V/AC, 50/60 Hz; 0.6 A
Output voltage/-current .....................12 V/DC; 2 A
SATA, 8.89 cm/3.5"
XP (Home, Pro, with SP1, SP2, SP3, only 32 Bit),
Vista™ (32 Bit and 64 Bit),
7 (32 Bit and 64 Bit), 8, 8 Pro
Mac OS 9.0 and higher,
Linux 2.4.18 and higher
These operating instructions are published by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in technology and equipment reserved.
© Copyright 2014 by Conrad Electronic SE. V1_0314_02-KV