Cleaning And Care; Technical Data - Renkforce RF-TD-100 Bedienungsanleitung

9 Cleaning and care

Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions.
They damage the housing and can cause the product to malfunction.
– Do not immerse the product in water. Do not rinse the product under the tap or expose
to moisture.
1. Before cleaning, disconnect the product from the power supply and connected devices.
2. Clean the product with a dry, fibre-free cloth.
3. Keep the product in a cool and dry place, away from direct sunlight.
10 Disposal
This symbol must appear on any electrical and electronic equipment placed on the
EU market. This symbol indicates that this device should not be disposed of as
unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose
of it separately from unsorted municipal waste. Spent batteries and accumulators,
which are not enclosed by the WEEE, as well as lamps that can be removed from
the WEEE in a non-destructive manner, must be removed by end users from the
WEEE in a non-destructive manner before it is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-back
of waste. Conrad provides the following return options free of charge (more details on our
website):
in our Conrad offices
at the Conrad collection points
at the collection points of public waste management authorities or the collection points set
up by manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in
countries outside of Germany.

11 Technical data

11.1 Power supply
Input voltage/current ...................... max. 20 V/DC, 5 A (USB-C
Rated power .................................. max. 100 W
11.2 Ports
USB-C PD charging input port ..... USB PD charging input: max. 100 W, 20 V/DC, 5 A
®
USB-C (3.0) PD port (host) * ........ USB PD charging output: max. 100 W, 20 V/DC, 5 A;
®
USB 3.2 Gen 1, max. 5 Gbps, 5 V, 3 A max. (15 W)
Supports DP Alt Mode
HDMI output port ........................... UHD 4K (3840 x 2160 pixels at 30 Hz)
USB-A (3.0) ports x 2 * .................. USB 3.2 Gen 1, max. 5 Gbps, 5 V, 0.9 A (4.5 W)/port,
(total: 1.8 A, 9 W)
Supports USB storage devices max. 1 TB
SD card slot *# ............................... Supports SD cards max. 1 TB
microSD card slot *# ...................... Supports microSD cards max. 1 TB
3.5 mm audio input/output jack ...... 16-bit 48 kHz
* Data transmission: max. 5 Gbps. The transfer speed of the ports and slots will vary
depending on the USB-C port specification of the host device.
®
# Supports simultaneous use of both card slots.
11.3 Environment
Operating conditions ...................... 0 to +50 °C, 5 – 95 % RH (non-condensing)
Storage conditions ......................... -20 to +60 °C, 5 – 95 % RH (non-condensing)
11.4 Compatibility
Supported operating systems ........ Windows
macOS 10.8.5 (lowest) to macOS 12.4 (highest), Linux
Supported smartphone/tablet
OS ................................................. Android
notebooks and smartphones that support USB-C
Mode
11.5 Other
Product dimensions (W x H x D) ... 85 x 54 x 145 mm (folded)
Weight ........................................... 215 g
Tablet size supported ..................... max. 30.5 cm (12")
Load capacity ................................ max. 10 kg
PD)
®
7 / 8 / 8.1 / 10 / 10S / 11 / Windows
®
6.0 or later, iPadOS 13 or later, and most
™
RT,
®
DP Alt
®
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represents the technical status at the time of printing.
Copyright 2022 by Conrad Electronic SE. *2614583_v1_0922_02_DS_m_4L_(1)