Connection To A Pabx; Program.recall.key; Program.eic.(Exchange.identification.code) - TIPTEL ergoVoice A2 Bedienungsanleitung

Connection to a PABX

Connection to a PABX
Program recall key
Use.the.R-key.to.use.the.telephone.network.functions.or.the.functions.of.your.
PABX..In.the.factory.pre-set.the.short.flash.(120.ms).is.set..The.short.flash.is.
required.e..g..to.activate.special.features.offered.by.the.network.provider..Please.
also.refer.to.the.PABX.operating.instructions...
.
. . .
.
. . .
. . .
. . .
..
. . .
..
. . .
.
Program EIC (Exchange Identification Code)
If.you.operate.the.telephone.at.a.PABX,.for.initial.operation.you.have.to.program.
an.Exchange.Identification.Code.and.the.required.dialling.pause..This.is.neces-
sary.for.dialling.external.telephone.numbers..You.can.enter.1.EIC.number.(1.-.4.
digits)..Please.also.refer.to.the.PABX.operating.instructions.
.
. . .
.
. . .
Press.the.R-key.and.the.redial.key.at.the.same.time..(The..
„P".for.„Programming-mode".appears.in.the.display.)
Select.the.flash-time.using.the.arrow.keys:
„Flashtime.80.ms",..
„Flashtime.120.ms",.
„Flashtime.200.ms". a nd.confirm.with.the.key.
Enter.the.4-digit.PIN-code.(factory.pre-set:.0000)..The.flash..
time.is.stored..
Select.another.function.using.the.arrow.keys.or.exit.the..
programming.menu.with.the.C-key..
Press.the.R-key.and.the.redial.key.at.the.same.time..(The..
„P".for.„Programming-mode".appears.in.the.display.)
Select.the.function."Exchange.Identification.Code".using.the..
arrow.keys.and.confirm.with.the.key.
35
..
...
en