Toshiba REGZA R350 Serie Bedienungsanleitung Seite 28

PC audio
In order to receive sound from a connected PC, plug the
audio cable into the back of the television (as shown in
'Connecting a computer' section), then use the
PC/HDMI1 audio settings.
In the SET UP menu press
1
AV connection is highlighted, then press OK.
Language
Country
Auto tuning
Manual tuning
AV connection
Picture position
Back
MENU EXIT
Highlight PC/HDMI1 audio then use
2
the PC option.
AV connection
PC/HDMI1 audio
HDMI1 audio
Lip Sync
EXT2 input
Woofer
Back
MENU EXIT
NOTE: Selecting the PC option will force HDMI
into digital audio.
EIA/CEA-861-D compliance covers the transmission of
uncompressed digital video with high-bandwith digital content
protection, which is being standardized for reception of
high-definition video signals. Because this is an evolving
technology, it is possible that some devices may not operate
properly with the TV.
HDMI, the HDMI logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing, LLC.
Input selection and
AV connections
until
e
SET UP 1/2
English
UK
OK
OK
OK
OK
Watch TV
to select
x
PC
Digital
AV
Internal
Watch TV
continued
If the connected HDMI source does not support digital
audio, plug the audio cable into PC/HDMI1 audio on the
back of the television (as shown in the 'Connecting a
computer' section), then use the HDMI1 audio settings.
In the AV connection menu press
1
PC/HDMI1 audio and using
Then highlight HDMI1 audio and using
2
select Auto., Digital or Analogue.
PC/HDMI1 audio
HDMI1 audio
Lip Sync
EXT2 input
Woofer
Back
MENU
If the sound is missing select an alternative
setting.
NOTE: HDMI1 supports digital and analogue
sound, HDMI2 is digital sound only.
Certain formats of DVD disk may not output from
this TV (32/44.1/48kHz and 16/20/24 bits are
acceptable).
Lip Sync can synchronize the sound and picture. This
feature is only available when equipment compatable with
Lip Sync is connected via HDMI.
In the AV connection menu press
1
Lip Sync.
Using or
z
2
28
HDMI1 audio HDMI audio
e
select HDMI1.
x
AV connection
HDMI1
Auto.
Internal
Watch TV
EXIT
Lip Sync Latency
e
select On or Off.
x
to highlight
or
z x
AV
to highlight