Regza-Link Input Source Selection - Toshiba REGZA R350 Serie Bedienungsanleitung

This feature uses CEC (Central Electronic Control) technology and allows the control of Toshiba REGZA-LINK
compatible equipment from the television remote control. Note: not all Toshiba products currently
support REGZA-LINK.
REGZA-LINK equipment control
REGZA-LINK mode on the televisions remote control
allows the control of connected REGZA-LINK equipment
being watched.
To control the REGZA-LINK input source first select the
equipment with REGZA-LINK input source selection, then
switch the mode on the remote control to REGZA-LINK
and press any buttons.
The available functions depend on the equipment
connected. Not all the remote control keys may be
available. Please refer to the operation manual for each
piece of equipment connected.
The television features that can be controlled by the
connected equipment are: Standby, Volume, Channel,
Sound mute, Display information, Number buttons and
Previous programme.
REGZA-LINK controls
24

REGZA-LINK input source selection

When any equipment using CEC technology is connected
the REGZA-LINK icon will show in the input source list
allowing selection of individual devices.
1
Press B and a list will appear on screen
showing modes and all stored external
equipment.
Use or to highlight an input source, then
f e
2
press OK to select.
1
HDMI2
HDMI1
3C
B
B 2
B 1
4
3
2
NOTE: When the television is switched on it will
take a few minutes for the REGZA-LINK logo to
appear in the list, when an HDMI cable is
removed it will take a few minutes for the logo to
disappear.
NOTE: If the HDMI cable from connected
equipment is changed or HDMI equipment
setting are changed Enable REGZA-LINK in the
REGZA-LINK setup menu may need to be reset
to On.
The following features are dependent on the
connected equipment. For operating information
refer to the operation manual for all connected
equipment.
BBC1
REGZA-LINK
DVD
CH4
ITV
BBC2