Option 2: Connecting A Tv Set For Video And Stereo System For Audio; Connecting A Dvd Player; Connecting The Microphones; Connecting To The Mains Power Supply - Silvercrest TM-220 Bedienungsanleitung

English
Option 2: Connecting a TV Set for video and stereo system for
audio
Carefully separate the yellow wire of the audio/video cable so you can
plug it to the TV set separately. If your TV set has a RCA socket for
video input, you can connect the yellow RCA connector to this socket.
Otherwise proceed as for Option 1 and use the SCART adapter
(INPUT). In this case the red and white sockets for audio input are not
used on the TV set. Instead of connecting the corresponding cables
to the adapter, connect them to your stereo system. Use a suitable
input (other than Phono).

Connecting a DVD player

Connect one of the supplied audio/video cables to the group of three
RCA sockets (Input). The different cables and sockets are colour-
coded for easier connection. If your DVD player also features a corre-
sponding group of three sockets for audio and video signals, you can
connect the cable directly to these. If your DVD player only features a
SCART socket, use the supplied SCART adapter (OUTPUT). The
adapter also features the same colour code.

Connecting the microphones

Now you can connect one or both microphones. Insert the XLR plug
of the microphone cable into the microphone. The correct end of the
cable can be easily identified by the shape that matches that of the
microphone. The other end has a jack plug which is inserted into one
of the microphone sockets of the SilverCrest TM-220. It is irrelevant
which of the two sockets you use. You only have to remember that
each input socket is assigned to one of the two microphone gain con-
trols.

Connecting to the mains power supply

First connect the mains adapter to your SilverCrest TM-220 and then
to an easily accessible mains socket. The device is then ready for
operation.
47
Silvercrest TM-220 (V1.7)