Herunterladen Inhalt Inhalt Diese Seite drucken

Disposal Of Packaging; Requirements For The Set-Up Location; Audio/Video Connection - Silvercrest SKES 2 A1 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für SKES 2 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 84

Disposal of packaging

GB

Requirements for the set-up location

Audio/video connection

8
The packaging protects the device from transport damage. The packaging materials
have been selected in accordance with their environmental friendliness and
disposal attributes, and are therefore recyclable.
Returning the packaging to the material cycle conserves raw materials and re-
duces the amount of waste that is generated. Dispose of packaging material that
is no longer needed in accordance with applicable local regulations.
NOTE
If possible, keep the device's original packaging during the warranty period
so that the device can be packed properly for returning in the event of a
warranty claim.
For safe and trouble-free operation of the device, the set-up location must fulfil
the following requirements:
When setting it up, place the device on a firm, flat and horizontal surface.
Do not place the device in a hot, wet or extremely damp environment or in
the vicinity of flammable materials.
Only operate the device in locations with adequate ventilation.
The surfaces of furniture may possibly contain components that could affect
the device's rubber pads and soften them. If necessary place a cover under
the device's pads.
NOTE
The device can be operated with one or two microphones.
When connecting additional devices (DVD player, TV, etc.) please follow
the instructions in the respective operating instructions.
Connect the audio signal for the accompanying music source (e.g. a DVD
player) using one of the supplied audio/video connection cables to the
AUDIO INPUT sockets (L = left channel
accompanying music source only has a SCART output, you can use the
supplied SCART/cinch adapter "OUT"
the adapter and cable connections as an orientation aid.
Connect the video signal of the accompanying music source to the VIDEO
INPUT socket
. The video signal is used to display the song lyrics.
, R = right channel
). If the
. Use the coloured markings on
SKES 2 A1

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis