Safety Instructions; General; Operating Environment - Silvercrest TM-220 Bedienungsanleitung

Safety instructions

General

Before using this device for the first time, always read the following
instructions and pay attention to all warnings, even if you are familiar
with handling electronic devices. Keep this manual safe for future ref-
erence. If you sell the device or pass it on, always include this man-
ual.

Operating environment

Place the device on a stable, even surface and do not place any
heavy objects on the device. The device is not designed for use in
environments with a high temperature or humidity (e.g. bathrooms),
and must be kept free from dust. Operating temperatures and operat-
ing air humidity: 15 °C to 35 °C, max. 85 % rel. air humidity
Always make sure that
• air can always circulate freely (do not place the device on shelves,
on a thick carpet or a bed, and always leave at least 10 cm clear-
ance on all sides);
• no direct heat sources (e.g. heating) can affect the device;
• no direct sunlight or bright artificial light reaches the device;
• contact with sprayed and dripping water and corrosive liquids is
prevented and the device is never operated near water; in particu-
lar it should never be immersed (do not place any objects filled
with liquids such as vases or drinks on or near the device);
• no fire sources (e.g. burning candles) are placed on or near the
device;
• no foreign objects penetrate the device;
• the device is not subjected to any extreme temperature fluctua-
tions, as this may result in moisture caused by condensation and
therefore a short circuit;
• the device is never be subjected to excessive shocks and vibra-
tions.
English
Silvercrest TM-220 (V1.7)
41