General Presentation; Description Of The Instrument - Chauvin Arnoux C.A 6121 Bedienungsanleitung

This machine has been designed for testing the electrical safety of machines, in conformity with standard EN60204-1, parts 19 -1 to
19-5.
Its worksite case is hardwearing, but also easy to carry to your measurement site. Its interface, simple to use, gives you very rapid
access to all the main functions of the instrument. Its optional accessories allow it to be adapted to all specific environments.
List of measurements that the instrument can perform :
Dielectric test with a test voltage of 1000 V AC
Dielectric test with a test voltage of 1250 V AC
Dielectric test with a test voltage of 1500 V AC
Voltage drop scaled to 10 A AC with a test voltage of 12 V / > 10 A AC
Low resistance with a test voltage of 12 V / >10 A AC
Insulation resistance with a test voltage of 500 V DC
Insulation resistance with a test voltage of 1000 V DC
Two pole discharge time (residual voltage)
Four pole discharge time (residual voltage)
INSULATION (M ) Ω
20
19
C1
18

1. GENERAL PRESENTATION

2. DESCRIPTION OF THE INSTRUMENT

3
1 2
REMOTE WARNING LAMP 12V~ RS232C
DISCHARGE TIME ( t)
500 - 1000 V
+
TEST
600V CAT III
MAINS
TEST
∆
~
CONTINUITY 12V/>10A ( U,R )
10A
P1 P2
DIELECTRIC (HV)
1 - 1.25 - 1.5 kV ~
17
Fig.1. Presentation of the front panel
4 5 7
6
MΩ 500V
113.5
MΩ
∆
Un Rmin
MEM/MR MEM/MR PRINT/RS PRINT/RS
C2
CHAUVIN
ARNOUX
MACHINE TESTER
MACHINE TESTER
16 15
28
8
230V / 50Hz
600VA
Ω
150M
U=513V
9min 59s
Timer
ON
OFF
TEST ON
SET-UP / SET-UP
C.A 6121
C.A 6121
START/STOP
14 13
9
10
11
12