Ape Labs Apestick Bedienungsanleitung Seite 27

ape labs apestick user manual
And this is how it's done
At first you have to assign the respective group to the Apesticks.
The standard group is GROUP 1.
Push the button of the Apestick for about 5 seconds. The Apestick is now
in BLUE MODE. (The Apestick flashes blue)
Use the remote control. Press the MENU button for 2 seconds. Got to
BLUE SETUP. The last menu item (press „-" button once) takes you to the
REMOTE GROUP. Press the ENTER button and choose one of the four
groups.
Example
You choose REMOTE GROUP 3. Afterwards press the ENTER button. With
this step you have assigned the reception group 3 to the Apestick. This
means that this Apestick reacts only if the GROUP 3 is also being sent to.
By pressing the button GROUP on the remote control you choose which
group is being sent to and with the buttons EXIT, -, + ENTER you make your
choice. It is also possible to send to several groups.
27