Ape Labs Apestick Bedienungsanleitung Seite 24

ape labs apestick user manual
24
BLUE SETUP
- REMOTE-ACTIVATE: NC
- REMOTE-DEACTIVATE: NC
- INPUT SELECT: Setting source of receiving per radio transmission
- DMX ADDRESS: Setting of DMX address per radio transmission
- CHANNELS: Depends on ape labs product
- DMX TAB: Select DMX mode (RGBWS, EFFECT MODE FIX, EFFECT
MODE RGBW)
- STROBE: Turn strobe channel on/off in RGBWS DMX mode
- DMX FAILURE: What to do if there is no DMX signal?
- USE WHITE LEDS: The white LEDs are activated by an RGB mixed color
(saves battery life)
- LED POWER: Increase battery life by dimming the LEDs
- WHITE CORRECTION: Turn color correction adjustment on/off
- WHITE CALIB RED: Adjust color correction – applies to all colors
or programs
- WHITE CALIB GREEN: Adjust color correction – applies to all colors
or programs
- WHITE CALIB BLUE: Adjust color correction – applies to all colors
or programs
- AC FAILURE: What to do if there is no power? (ape lamp operated by
charging adapter)
- CHAIN SIZE: Size of lamps- chain (up to 32 units)
- POS IN CHAIN: Position of lamp in chain – (from left to right)
- SET PIX SIZE: Setting of pixelsize (while using programs)
- SET START PIX: Setting of startpixel (while using programs)
- NUMBER OF SET: NC
- REMOTE GROUP: Assigning of the group (1-4) per radio transmission