Ape Labs Apestick Bedienungsanleitung Seite 23

REMOTE SETUP
- DMX ADDRESS: Setting of DMX address
- CHANNELS: Depends on ape labs product
- DMX TAB: Select DMX mode (RGBWS, EFFECT MODE FIX, EFFECT
MODE RGBW)
- STROBE: Turn strobe channel on/off in RGBWS DMX mode
- DMX FAILURE: What to do if there is no DMX signal?
- USE WHITE LEDS: The white LEDs are activated by an RGB mixed color
(saves battery life)
- LED POWER: Increase battery life by dimming the LEDs
- WHITE CORRECTION: Turn color correction adjustment on/off
- WHITE CALIB RED: Adjust color correction – applies to all colors
or programs
- WHITE CALIB GREEN: Adjust color correction – applies to all colors
or programs
- WHITE CALIB BLUE: Adjust color correction – applies to all colors
or programs
- AC FAILURE: What to do if there is no power? (ape lamp operated by
charging adapter )
- CHAIN SIZE: Size of lamps- chain (up to 32 units)
- POS IN CHAIN: Position of lamp in chain – (from left to right)
(Here you set up how many apesticks you like to control in a chain and in
which positions they are. Pls. read chapter "OPERATION OF FEATURES".)
ape labs apestick user manual
23