Ape Labs Apestick Bedienungsanleitung Seite 21

OPERATION
There are two ways to operate the device:
1. Radio remote control: Operate using buttons and display.
2. Radio DMX- transmitter: Wireless DMX via any light console.
(with AFO –wireless DMX)
LIGHT
There are two ways to emit light:
1. ONE COLOUR STATIC: static light – no effects
2. PROGRAM: colour change, effects, running lights effects, etc.
ALL INFORMATION RELATES TO THE DISPLAY OF THE
REMOTE CONTROL
COLOUR
The display of the remote control shows „ ONE COLOUR STATIC"
If not, some programme must be active.
This is how you change it:
1. Press the „program" button.
2. Afterwards the „–„ button until „ONE COLOR STATIC" appears.
3. Confirm with „enter".
4. Press button „C1".
5. With „+" and „–„ you can now choose the colours.
PROGRAMMES
You can choose from 20 programmes. All colours and processes are pre-
programmed. You can also change all attributes yourself, like e.g. colour
and direction of movement.
We assume that you have the device switched on.
1. Press the „prog" button. The respective programme is shown in the
display. (Normally „one colour static" should be seen.)
2. Using „+" and „ –„ you can go through the programmes.
ape labs apestick user manual
21