Operating Determinations - Ape Labs Apestick Bedienungsanleitung

ape labs apestick user manual
This is especially valid for metal parts. If any metal parts like staples or
coarse metal chips enter into the device, the device must be taken out
of operation and disconnected immediately. Malfunction or short-circuits
caused by metal parts may cause mortal injuries.
Never look directly into the light source, as sensitive persons may suffer an
epileptic shock (especially meant for epileptics)!
Keep away from children and amateurs!

OPERATING DETERMINATIONS

This device is designed for professional use, e.g. on stages, in disco-
theques, theatres etc.
Lighting effects are not designed for permanent operation. Consistent
operation breaks will ensure that the device will serve you for a long time
without defects. Do not shake the device. Avoid brute force when installing
or operating the device.
When choosing the installation-spot, please make sure that the device is
not exposed to extreme heat, moisture or dust. There should not be any
cables lying around. You endanger your own and the safety of others!
This device must never be operated or stockpiled in sourroundings whe-
re splash water, rain, moisture or fog may harm the device. Moisture or
very high humidity can reduce the insulation and lead to mortal electrical
shocks. When using smoke machines, make sure that the device is never
exposed to the direct smoke jet and is installed in a distance of 0.5 meters
between smoke machine and device. The room must only be saturated with
an amount of smoke that the visibility will always be more than 10 meters.
The ambient temperature must always be between -5° C and +45° C. Keep
away from direct insulation (particularly in cars) and heaters.
Never use the device during thunderstorms. Over voltage could destroy the
device. Always disconnect the device during thunderstorms.
Always fix the fixture with an appropriate safety-rope.
Please consider that unauthorized modifications on the device are forbid-
den due to safety reasons!
Never remove the serial barcode from the device as this would make the
guarantee void.
18