Pin Assignment; Technical Data - Cameo CL 200 Bedienungsanleitung

DMX TERMINATORS (TERMINATING RESISTORS)
To prevent system errors, the last device in a DMX chain needs to be equipped with a terminating resistor (120 ohm, 1/4 Watt).
3-pin XLR connector with a terminating resistor: K3DMXT3
5-pin XLR connector with a terminating resistor: K3DMXT5

Pin Assignment

3-pin XLR connector:
1
3
2
DMX ADAPTER
The combination of DMX devices with 3-pin connectors and DMX devices with 5-pin connectors in a DMX chain is possible with suitable
adapters.
Pin Assignment
DMX Adapter 5-pin XLR male to 3-pin XLR female: K3DGF0020
Pins 4 and 5 are not used.
Pin Assignment
DMX Adapter 3-pin XLR male to 5-pin XLR female: K3DHM0020
Pins 4 and 5 are not used.

TECHNICAL DATA

Model name:
Product type:
Type:
LED colour spectrum:
No. of LEDs:
LED type:
LED colour temperature:
Refresh rate:
Beam angle:
DMX input:
DMX output:
DMX mode:
DMX functions:
Standalone functions:
Stroboscope:
Control:
Operating controls:
Display elements:
Operating voltage:
Power consumption:
Light intensity (@ 1 m):
Lighting power:
Power connection:
Fuse:
Ambient temperature (in operation):
Relative air humidity:
Housing material:
Housing colour:
10
5-pin XLR connector:
CLCL200
LED spotlight
indoor
cold white–warm white
1
200 W
7800–3200 K
17500 Hz
25° (50° field)
3-pin male XLR
3-pin female XLR
1-channel, 2-channel 1, 2-channel 2, 3-channel, 4-channel
dimmer, stroboscope, cold white, warm white
master/slave mode, stroboscope, dimmer response, dimmer curves, static mode
approx 1–30 Hz
USITT DMX512
Mode, Enter, Up, Down
illuminated, 2-line LC display
100–240 V AC / 50–60 Hz
200 W
23000 lx
7500 lm
blue mains input socket
white power output socket (max. 6 A)
F3AL/250 V (5 x 20 mm)
0°C – 40°C
<85%, non-condensing
Metal
black
5
4
3
2
1