The Macro Function (Macro); Programming A Macro - Silvercrest SFB 10.1 C3 Bedienungsanleitung

SilverCrest SFB 10.1 C3
3. Press
The display reads "SURE DELET".
4. Press
"DELETE ALL".
Press to go back one menu level. To return to the start window,
press one of the device buttons.

The macro function (MACRO)

The macro function lets you save up to 16 commands for a device that
will be sent in sequence when pressing one single button. Please
remember that one command is used for device selection, leaving 15
commands free to be assigned.
Example: Power on TV > Select channel 11 > Display Teletext > Open
Teletext page 222.

Programming a macro

1. Press and hold the
2. Press
3. Press
"MACRO6" and press
4. The display reads "SET UP". Press
5. If you select a macro that already has a command sequence
assigned, the display reads "MACRO HAS". In this case you have to
delete this macro before entering commands or select a different,
free macro.
6. The device currently selected is shown.
7. Enter the command sequence you want using the buttons. Always
start with the device button for the device you wish to record the
macro for. The number of commands already entered is shown on
the left hand side of the display.
8. By default, the different macro commands are transmitted
sequentially every second. As this could be too fast for some devices,
you can adjust the delay time in 2-second increments from 5 to 41
seconds.
9. To do this, press the button
of the button delays the pause time after the last command for 2
more seconds and the set value is shown on the display.
10. After you have finished entering the command sequence, press
. The display reads "SUCCESS".
You can press up to 16 buttons per macro, including the device button.
After this, the macro is applied automatically and the display reads
"SUCCESS".
22 - English
, select "DELETE ALL" and press
to confirm. The display reads "DELETED" and then again
, select "MACRO" and press
, select "MACRO1" (or "MACRO2".....
button for 3 seconds.
to confirm.
to confirm.
after a button command. Each press
to confirm.
to confirm.