Albrecht AE 6690 Bedienungsanleitung Seite 27

Receive Volume
On-Off
6 pin MIC socket
Programming the country-settings
Your CB radio can always be switched between all European different country versions. To switch
you need to hold one or two buttons on the front side while you turn on the radio with the VOL / ON
(volume and on / off). Afterwards you release the pressed button(s). The programmed country
code is saved as long as you program another country code or until the device is disconnected
from the power supply.
The factory setting, with which your device after connecting to 12 V starts, may be differently for
delivery in specific countries.
When first turned on, radios sold in Germany and most other countries will start with the AM/FM
programming:
•
dE 80/40: 80 channels FM and 40 channels AM. The pre-programmed channel is channel
9 in AM, so the device starts directly on the international trucker- and emergency channel.
Shortly after turning on the device "dE" is displayed.
This programming is only allowed in Germany and Czech+ Slovak Republics and must not be used
in any other country (in Slovakia before implementation of new standard 40 FM + CH 70-80).
•
EU 40/40: 40 channels FM and 40 channels AM according new EU / CEPT standard EN
300 433-2 V.1.3.1 and CEPT / ECC DEC (11)03. The pre-programmed channel here is also
channel 9 in AM, so the device starts directly on the international trucker- and emergency
channel. Shortly after turning on the device EU or E (for Europe) is displayed.
This programming with 4 Watts in AM and FM is provided for whole Europe. For example it is
already implemented in Belgium, Croatia, Cyprus, Czech Republic, Estonia, Germany, Switzerland
(with Liechtenstein), France, Greece, Italy, Norway, Poland, Portugal, Slovenia and Spain. For
Poland we also have a special programming (see further below), where the frequencies are 5 kHz
displaced downwards, as it was in the old Poland standard. In Bulgaria, Lithuania, Finland,
Sweden, Ireland, Romania, Netherlands the new regulations with 4 Watts AM are not yet
Operation
SCH – TOT - AM/FM –
Channel 9
LCD Channel &
Status Display
FC – BP – TSQ - ASQ
9
Squelch
Rotary control
Channel