Ks Active; Led Indicator (Front Panel) - T+A KS ACTIVE Betriebsanleitung

Front
LED indicator
(front panel)
 KS ACTIVE
These KS ACTIVE-loudspeakers are high-quality three-way floor-standing
speakers with very neutral, audiophile sound characteristics. They are fitted with
zero-loss active cross-overs and separate output stages for each drive unit (fully
active loudspeakers).
The KS ACTIVE feature an automatic power-on circuit which switches the loud-
speakers on when a music signal is present, and switches them off again when
playback ceases. They can be operated in conjunction with any pre-amplifier
outputs.
KS ACTIVE loudspeakers are supplied with a front cover. This is designed to
protect the drive units.
The grilles cannot and must not be removed, as they are an integral part of the
loudspeakers' acoustic system. Any attempt at removal will damage the grilles and
have an adverse effect on the sound image.
The LEDs behind the front grilles indicate the power status of the KS ACTIVE-
loud-speakers.
• dark green
The speaker is in stand-by mode, and will switch itself on automatically when
a music signal is present.
• bright green
The LED indicates normal operational mode: the speaker is switched on and
ready for use.
• red
There is a problem with the loudspeaker, e.g. overloading or overheating. To
eliminate the problem, switch the speaker off using the mains switch (back
panel), or disconnect the mains plug. When the speaker has cooled down,
switch it on again, and it should work normally. If the problem cannot be
solved in this way, you will need to contact your  dealer.
12
Back panel