Specifications; Specific Safety Rules - Makita BHP441 Betriebsanleitung

ENGLISH
1. Red part
2. Button
3. Battery cartridge
4. Switch trigger
5. Lamp
6. Reversing switch lever
7. Speed change lever
8. Action mode changing ring
9. Adjusting ring
10. Arrow
11. Graduations

SPECIFICATIONS

Capacities
No load speed (min
Blows per minute (min
Overall length
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for impact drilling in brick, concrete
and stone as well as for drilling without impact in wood,
metal, ceramic and plastic.
Explanation of general view
12. Steel band
13. Grip base
14. Protrusion
15. Side grip
16. Groove
17. Sleeve
18. Bit holder
19. Bit
20. Depth rod
21. Clamp screw
22. Screw
Model
Concrete
Steel
Wood
Wood screw
Machine screw
High (3)
-1
) Medium (2)
Low (1)
High (3)
-1
) Medium (2)
Low (1)
Net weight
23. Hook
24. Blow-out bulb
25. Limit mark
26. Rear cover
27. Screws
28. Arm
29. Spring
30. Recessed part
31. Carbon brush cap
32. Hole
33. Carbon brush cap
BHP441
14 mm
13 mm
50 mm
6 mm x 75 mm
0 - 1,700
0 - 600
0 - 300
0 - 25,500
0 - 9,000
0 - 4,500
250 mm
2.1 kg
D.C. 14.4 V

SPECIFIC SAFETY RULES

DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to ham-
mer drill safety rules. If you use this power tool
unsafely or incorrectly, you can suffer serious per-
sonal injury.
1. Wear ear protectors with impact drills. Exposure to
noise can cause hearing loss.
2. Use auxiliary handles supplied with the tool. Loss
of control can cause personal injury.
3. Hold power tools by insulated gripping surfaces
when performing an operation where the cutting
tool may contact hidden wiring or its own cord.
Contact with a "live" wire will make exposed metal
parts of the tool "live" and shock the operator.
4. Always be sure you have a firm footing. Be sure
no one is below when using the tool in high loca-
tions.
5. Hold the tool firmly with both hands.
6. Keep hands away from rotating parts.
BHP451
16 mm
13 mm
65 mm
10 mm x 89 mm
6 mm
0 - 1,700
0 - 600
0 - 300
0 - 25,500
0 - 9,000
0 - 4,500
250 mm
2.2 kg
D.C. 18 V
5