Disposal; Warranty And Guarantee - NovoPress ACO102 Betriebsanleitung

Information
The next service deadline is indicated on the press device.
This service must be performed at least every 2 years or at the latest when the LED display
indicates that a service is due (see Section
Routine inspection (before use, at the start of the working day) and when soiled
(Fig. 11)
Check for visible damage, material cracks and other signs of wear. If defects are found, do not use the
device and have it repaired.
Six-monthly inspection
Have the device inspected by a qualified electrician or a Novopress workshop.
Annual inspection
Have the press device inspected and serviced at Novopress or a Novopress workshop.

10 Disposal

CAUTION!
Groundwater hazard
The device contains hydraulic fluid.
Hydraulic fluids pose a hazard to groundwater. Uncontrolled drainage or improper disposal is
punishable by law.
Therefore:
– Dispose of the device in an environmentally responsible manner.
The instructions in the operating instructions provided with the battery charger must be complied with
when disposing of rechargeable batteries and the charger.
Novopress recommends that disposal be carried out by authorised specialist companies.
This product conforms to the requirements in EU Directive 2002/95/EC RoHS (Restriction of Hazardous
Substances).
In accordance with EU Directive 2002/96/EC WEEE (Waste Electrical and Electronic Equipment),
manufacturers of electrical devices are obliged to take back old devices and to dispose of them in an
appropriate manner.
The product must not be disposed of as normal household waste. Old devices must be returned directly
to Novopress for proper disposal.

11 Warranty and guarantee

Novopress provides the full statutory warranty of 24 months for its press devices and tools. The warranty
period always commences on the date of delivery, which must be proven by means of the sales
documentation in case of doubt.
Within the warranty period, the warranty covers the repair of any damage or malfunction of these tools
that is attributable to material or production faults.
The following are not covered by the warranty
• Damage caused by improper use or inadequate servicing.
• Damage caused by the use of products not approved by Novopress for use with its press
devices.
• Damage caused by pressing unsuitable pipes or fittings.
For wearing parts, the Novopress warranty lasts only for the intended service life.
Service work and parts provided in response to warranty claims do not have to be paid for. However, all
shipping costs shall be borne by the user.
Claims can only be accepted if the device is delivered to Novopress or a Novopress workshop in an
assembled state.
Repair or replacement of the device under warranty does not result in an extension of the warranty period.
Repair or replacement can only be performed using as-new components, the function of which
corresponds to that of the old components. All parts that are faulty and consequently replaced are the
property of the manufacturer.
Extended warranty on expiry of the statutory warranty period
We voluntarily provide the following extended warranties beyond the statutory warranty period.
8.2
Meaning of the LED display).
15
ACO102
EN