Monitoring A Channel - Motorola CLP446 Benutzerhandbuch

Monitoring a Channel

1. To activate, press the Menu button to navigate
to Monitor mode.
2. When Monitor is OFF, you can hear the voice
prompt: "Monitor" – "To activate" – "press +/-".
3. Press either "+/-" button to activate the Monitor;
press either "+/-" button again to deactivate.
Note: When Monitor is ON, you can hear static if
no activity is present or audio if channel
activity is present.
4. To engage the Monitor mode, enable Monitor
via the menu and let the menu time out.
5. To deactivate, press PTT during Monitor
Menu mode.
Scanning
For multi-channel models only.
You can scan up to 8 channels. When the radio
detects activity, it stops scanning and locks in on
the active channel. This allows you to talk and
listen to the person transmitting without changing
channels.
10
English
1. Press the Menu button to navigate to
Scan mode.
2. When Scan is OFF, you can hear the voice
prompt: "Scan" – "To activate" – "press +/-".
3. Press either "+/-" button to activate the Scan;
press either "+/-" button again to deactivate.
4. When Scan is on, you can hear the voice
prompt: "Scan" – "To deactivate" – "press +/-"
button.