Motorola CLP446 Benutzerhandbuch Seite 26

Charging a Standalone Battery
For your convenience the battery on the CLP radios
can be charged as a standalone battery using either
a Single Unit Charger (SUC)
a Multi-Unit Charger (MUC)
Note: When acquiring additional chargers or power
supplies, make sure you have similar drop-in tray
chargers and power supplies sets. For part number
details, refer to "Chargers" Section on page 37.
Micro-USB
Charging Jack
To charge only the battery:
1. Insert the connector of the power supply into the
Micro USB port on the front of the drop-in tray
charger.
14
English
P/N IXPN4028
or
P/N IXPN4029 .
2. Connect the CLP power supply to a proper
AC outlet.
3. Insert the battery into the tray, with the inside
surface of the battery facing the front of the
charger, as shown.
4. Ensure the slots in the battery correctly engage
in the charger.
Estimated Charging Time
The following table provides the estimated charging
time of the battery.
Estimated Charging Time
Charging
Standard Li- Ion
Solution
Battery
Single Unit
4 hours
Charger
Multi Unit
2.5 hours
Charger
For further details, see "Batteries" Section on
page 36.
Battery Type
High Capacity
Li-Ion Battery
5.5 hours
4 hours