Motorola CLP446 Benutzerhandbuch Seite 20

OPERATION WITH MENU SETTINGS
Press Menu button to navigate through the Menu settings. Voice Assisted Operation feature* (* may not
be available on certain previous shipping radios). At any time in Menu mode, short press PTT or wait
3 seconds to exit the menu.
HOW TO...
Change Channel
Enter Monitor Mode
Enter Scan Mode
Send Call Tone
(enabled through CPS)
Quick Tip: It is not necessary to wait for the voice prompt to be completed before continuing with next button press.
Note: For single channel models, Monitor, Scan Mode and Call Tone are supported. Single channel models
support Scan mode when the user enables "Dynamic Talkaround Scan" on a repeater channel via the
customer programming software.
8
English
STEP 1
Press Menu button to navigate to Channel.
Press Menu button to navigate to Monitor.
Press Menu button to navigate to Scan.
Press Menu button to navigate to Call Tone.
STEP 2
Press +/- button to change
channel.
Press +/- button to activate or
deactivate Monitor.
Press +/- button to activate or
deactivate Scan.
Press +/- button to send Call
Tone.