Setting The Unit For Rainfall Measurement - elv WS 300 Bedienungsanleitung

EXIT
configuration
or
NEXT
+ –
NEXT
+ –
NEXT
All the settings required for the weather
station to operate normally have now been
made. The expanded settings are not needed
for normal operation.
Press the "EXIT" key to leave configuration
Quit
mode and return to normal mode.
Expanded
Press the "NEXT" key in order to make
settings
expanded settings and to calibrate the rain
sensor.
Entering the rain sensor calibration
value
The rainfall measuring system is delivered ex-
works with a high accuracy, so that normally
no calibration is required.
The calibration value must initially be
determined in normal mode as described
under 7.2.
Calibration
value
Enter the previously calculated calibration
value using the "+" and "-" keys.
Press "NEXT" to proceed to inputting the unit
of rainfall measurement.
Setting the unit for rainfall
measurement
The unit for the rainfall is indicated in the
"RAIN" field and can be expressed as l/m
or as mm.
Unit for
Select the desired unit using the "+" and "-"
rainfall
keys.
Press "NEXT" to get to the input function
for the indicator path.
41
2