Editing; Dubbing To Or From A Vcr - JVC GR-D650AS Bedienungsanleitung

Dubbing To Or From A VCR

To AV
connector
Audio/Video
cable
(provided)
1 2
VCR
1Yellow to VIDEO IN or OUT
2Red to AUDIO R IN* or OUT
3White to AUDIO L IN* or OUT
4To S-VIDEO IN or OUT (Connect when your
TV/VCR has an S-VIDEO IN/OUT connector.
In this case, it is not necessary to connect the
yellow video cable).
* Not required for watching still images only.
NOTE:
The S-Video cable is optional. Be sure to use the
YTU94146A S-Video cable. Consult the JVC
Service Sentre described on the sheet included in
the package for details on its availability. Make sure
to connect the end with a core filter to the camera.
The core filter reduces interference.
To S connector
S Cable
(optional)
3
4
TV
To use this camcorder as a player
1
Following the illustrations, connect the
camcorder and the VCR's input connectors.
2
Start playback on the camcorder. (
3
At the point you want to start dubbing, start
recording on the VCR. (Refer to the VCR's
instruction manual.)
4
To stop dubbing, stop recording on the VCR,
then stop playback on the camcorder.
NOTES:
●
It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
( pg. 15)
●
To choose whether or not the following displays
appear on the connected TV
• Date/time
Set "DATE/TIME" to "ON" or "OFF".
( pg. 32, 36) Or, press DISPLAY on the
remote control to turn on/off the date indication.
• Time code
Set "TIME CODE" to "OFF" or "ON".
( pg. 32, 36)
• Indications other than date/time and time code
Set "ON SCREEN" to "OFF", "LCD" or "LCD/
TV". ( pg. 32, 36)
To use this camcorder as a recorder
1
Following the illustrations, connect the
camcorder and the VCR's output connectors.
2
Set "REC MODE" to "SP" or "LP". (
3
Set the camcorder's Power Switch to "PLAY"
4
Set "S/AV INPUT" to "ON". (
5
Press the Recording Start/Stop Button to
engage the Record-Pause mode.
●
The " " or "
A/V IN S IN
the screen.
6
Start playback on the player.
7
At the point you want to start dubbing, press
the Recording Start/Stop Button to start
dubbing. The indication rotates.
8
Press the Recording Start/Stop Button again
to stop dubbing. The
rotating.
9
Press 7 to return to the normal playback
mode.
NOTES:
●
After dubbing, set "S/AV INPUT" back to "OFF".
●
Analogue signals can be converted to digital
signals with this procedure.
●
It is also possible to dub from another camcorder.

EDITING

43
EN
pg. 23)
pg. 33)
pg. 36)
" iindication appears on
indication stops