Zooming; Tele Mode; Journalistic Shooting; Interface Shooting - JVC GR-D650AS Bedienungsanleitung

Zooming

Produces the zoom in/out effect, or an
instantaneous change in image magnification.
Zoom In
Slide the Power Zoom Lever towards "T".
Zoom Out
Slide the Power Zoom Lever towards "W".
●
The further you slide the Power Zoom Lever, the
quicker the zoom action.
Zoom in (T: Telephoto)
1 x
1 0 x
10 x
NOTES:
●
Focusing may become unstable during Zooming.
In this case, set the zoom while in Record-
Standby, lock the focus by using the manual focus
( pg. 38), then zoom in or out in Record mode.
●
Zooming is possible to a maximum of 700X, or it
can be switched to 15X magnification using the
optical zoom. ( pg. 34)
●
Zoom magnification of over 15X is done through
Digital image processing, and is therefore called
Digital Zoom.
●
During Digital zoom, the quality of image may
suffer.
●
Digital zoom cannot be used when the VIDEO/
MEMORY Switch is set to "MEMORY".
●
Macro shooting (as close as approx. 5 cm to the
subject) is possible when the Power Zoom Lever is
set all the way to "W". Also see "TELE MACRO" in
FUNCTION Menu on page 33.
●
When shooting a subject close to the lens, zoom
out first. If zoomed-in in the auto focus mode, the
camcorder may automatically zoom out
depending on the distance between the
camcorder and the subject. This will not occur
when "TELE MACRO" is set to "ON". (
20x
40x
Zoom out (W: Wide angle)
Digital zoom zone
15X (optical) zoom zone
Approximate zoom ratio
pg. 33)
VIDEO RECORDING

Tele Mode

Performs instant clear zoom to an image during
recording or record/standby mode.
Press 1.3x TELE alternately during recording or
record/standby mode to switch to OFF/ON.
When you select "TELE ON". The Tele Mode
indicator "TELE" appears.
NOTES:
●
Available only when the VIDEO/MEMORY Switch
is set to "VIDEO".
●
Tele mode cannot be used when the 16:9 wide
mode (16:9 indicator) is selected.

Journalistic Shooting

In some situations,
different shooting
angles may provide
more dramatic results.
Hold the camcorder in
the desired position
and tilt the LCD
monitor in the most
convenient direction. It
can rotate 270° (90°
downward, 180°
upward).

Interface Shooting

The person you shoot can
view himself/herself in the
LCD monitor, and you can
even shoot yourself while
viewing your own image
in the LCD monitor.
1) Open the LCD monitor
and tilt it upward to 180°
so that it faces forward.
Then, pull out the
viewfinder fully.
2) Point the lens toward
the subject (yourself when
self-recording) and start
recording.
●
During Interface
Shooting, the monitor image appears inverted as it
would when viewing a mirror. However, the actual
recorded image does not appear inverted.
●
If the Quick Review (
interface shooting, the LCD monitor will be turned off.
In such a case, check the playback picture in the
viewfinder. To check the playback picture in the LCD
monitor, close the viewfinder.
EN
pg. 22) is executed during the
21