Detailed Description - Bosch PFS 5000E Originalbetriebsanleitung

20 | English
Symbols
Symbols and their meaning
The fine-spray system is suit-
able for glazes and lacquers
and for wall paints.
Step 1:
Choose the correct nozzle
cap
Step 2:
Set the spraying capacity
Step 3:
Set the air flow
1 609 92A 0MW | (28.2.14)
The sticker regarding operation of the fine-spray system is located on the
base station. The correct interpretation of the symbols helps you operate
the fine-spray system better and more safely.
"Wood/glaze"
application:
Spraying glazes, primers
and wood stains
Choose the grey nozzle
cap 11 for a
"wood/glaze" application
Select setting 1, 2 or 3
on the thumbwheel 4 for
a "wood/glaze" applica-
tion
Set "wood/glaze" appli-
cation at the air flow con-
trol 25
"Wood/lacquer"
application:
Spraying solvent-based
and water-dilutable lac-
quers, clear lacquers and
oils
Choose the black nozzle
cap 12 for a "wood/lac-
quer" application
Select setting 1, 2 or 3
on the thumbwheel 4 for
a "wood/lacquer" appli-
cation
Set "wood/lacquer" ap-
plication at the air flow
control 25
"Wall" application:
Spraying emulsion and
latex paints
Choose the white nozzle
cap 10 for a "wall" appli-
cation
Select setting 4 or 5 on
the thumbwheel 4 for a
"wall" application
Set "wall" application at
the air flow control 25
Detailed
description
See "Intended
Use", page 21.
See "Changing
the Nozzle Cap",
page 22.
See "Adjusting
the Spraying Ca-
pacity", page 23.
See "Adjusting
the Air Flow",
page 24.
Bosch Power Tools