Attention
To ensure a fast opening in a case of emergency, every pilot has to simulate several
test-openings, berfore first flights!
Sit into harness and release your rescue chute like in a case of emergency.
Practicing these circumstances help preparing yourself for fast and best releases!
5. Compatibility examination
Each new combination of rescue chutes and harnesses must be tested after first
packing by the manufacturer of the harness or by a person (school) authorized by
the manufacturer. The release of the rescue chute must be possible from the flight
position perfectly and according to the defaults of the construction specifications.
5. Towing activity
The harness SKYLINE RIDE is suitable for towing activity in general.
Mounting of the towing release:
The towing release is fastened with lines or screwing shackles to the main point
of suspension (see assembly drawing) of the belt system.
Are there doubts with mounting you should ask the winch driver or one of the
manufacturer authorized person in each case.
7.Tandem flight
The harness SKYLINE RIDE is not usable for tandem Flights in general, except
as passenger harness.
8. Protector
The Skyline "Permanent-Airbag" was built for high absorbation, with low height
and weight. This prevents bad spinal injuries.
The protector, which is a part of the SKYLINE RIDE achieves an absorption of
16G.
You may only build into the SKYLINE RIDE the special protector SKY 17. You can
remove the foam out of the airbag by opening the zipper at the inner side of the
backpart of the harness.
Attention:
Remove the protector before safety training over water. Otherwise you may
drown, if you splashdown. The lift of the airbag may push your head under
water.
skyline-flightgear.de
13
13