SkyLine Ride Handbuch Seite 34

Mounting the accelerator
pull line of accelerator thru the ring and
insert it into the eyelet
...another pulley is located on backpart
Sit into harness, measure the
corresponding length, knot-in
speedsystem-hook - Finished!
12 12
At the inside of the harness there is a
pulley on shoulder belt, near the
seatboard
thread the accelerator line thru both
pulleys. Attention: ensure that pulleys
are not twisted!
Pay attention to the accelerator!!
With 5 leave Container there must be built in a retainer
for the accelerator. In a case of emergency, the retainer
holds back the accelerator to the harness, that the
rescue chute opening will not be detained!
skyline-flightgear.de