Ending The Program Through Canceling; Standby Mode - Beko WMB 71431 A Handbuch

program selection knob to "On/Off" position
and selecting another program when no
program is running. Child-proof lock will
not be deactivated in case of power failures
or when the machine is unplugged. To
deactivate the child-proof lock, press the 1st
and 2nd auxiliary function buttons for 3 sec.
Ending the program through
canceling
When another program is selected instead
of a running program by turning the program
selection knob, the previous program is
cancelled. The " " (End/Cancel) light flashes
continuously to indicate that the program is
cancelled. If conditions to open the door are met
during cancellation (if water level is suitable, etc.),
the "Door" light will flash for about 1-2 minutes.
When the "Door" light becomes solid after 1 or
2 minutes, it means that the door can now be
opened.
"Stand-By" mode
"Stand-By" mode will allow to save energy while
your machine is not running. Unnecessary lights
and indicators will be turned off in this mode.
Thus, maximum energy saving is provided.
52 - EN