Auxiliary Functions; Time Display - Beko WMB 71431 A Handbuch

Auxiliary functions

Auxiliary Function Selection Buttons
Select the required auxiliary functions before
starting the program. Furthermore, you may
also select or cancel auxiliary functions that are
suitable to the running program without pressing
the "Start/Pause" button. To select or cancel
the auxiliary functions, the machine must be at
any prior stage than the auxiliary function to be
selected or cancelled. If the auxiliary function
cannot be selected or cancelled, light of the
relevant auxiliary function will blink 3 times to
warn the user.
Some combinations cannot be selected
C
together. Ex.: Pre-wash and Quick Wash.
Warning light of the selected auxiliary
function will light up.
Auxiliary function selection
If an auxiliary function that is not compatible
with the previously selected auxiliary function
is chosen, the function selected first will be
cancelled and the last auxiliary function selection
will remain active.
Ex.: If you want to select pre-wash first and then
quick wash, pre-wash will be cancelled and
quick wash will remain active.
Auxiliary function that is not compatible with the
program cannot be selected. (see, "Program
Selection Table")
Auxiliary function buttons may differ
C
according to the model of your machine.
• Voorwas (Prewash)
A pre-wash is only worthwhile for heavily soiled
laundry. Without pre-wash you save energy,
water, detergent and time. Pre-wash without
detergent is recommended for lace and curtains.
• Express Wassen (Quick Wash)
This function can be used for "Cottons" and
"Synthetics" programs. It decreases the washing
times for lightly soiled laundries and also the
number of rinsing steps.
Recommended load capacity is half of the
C
maximum load capacity of the selected
program.
• Extra Spoelen (Rinse Plus)
This function enables your machine to make
another rinsing in addition to the one already
made after the main wash. Thus, the risk for
sensitive skins (babies, allergic skins and etc.) to
be effected by the minimal detergent remnants
on the laundry can be reduced.
• Anti-Creasing
With this function, drum movement will be
lessened to prevent creasing and spinning speed
is limited. In addition, washing is carried out at a
higher water level.
• Rinse Hold
If you are not going to unload your clothes
immediately after the program completes, you
may use rinse hold function and keep your
laundry in the final rinsing water in order to prevent
them become wrinkled when there is no water
in the machine. Press "Start/Pause" button after
this process if you want to drain the water without
spinning. Program resumes. Your machine drains
the water and program completes.
If you want to spin your laundry that you left in
water:
- Adjust the spin speed.
- Press Start/Pause button
Program resumes. Your machine drains the water,
spins the laundry and program completes.
In case of selecting the auxiliary function for
soaking, your laundry will be kept in detergent
water before the washing process starts. Hence,
stains that ingrained into the laundry can be
removed better.

Time display

The display shows the time remaining for the
program to complete while a program is running.
Time is displayed in hours and minutes as "01:30".
Time delay
With the "Time delay" function you can delay the
program startup up to 19 hours. Time delay can
be increased in one-hour increments.
Do not use liquid detergent when you set
C
time delay! There is the risk of staining of the
clothes.
1. Open the loading door, place the laundry
inside and fill detergent drawer.
2. Select the washing program, temperature,
spin speed and, if required, the auxiliary
functions.
3. Pres "Time Delay" button to adjust the desired
time.
4. Press "Start/Pause" button. The time delay
will start to count down. The set time delay is
displayed. The "_" symbol displayed near the
time delay starts flickering up and down.
Additional laundry may be loaded during the
C
time delay period.
5. The selected program duration is displayed
at the end of the countdown process. "_"
symbol disappears and the selected program
starts.
Changing the delay time
If you want to change the time during the
countdown:
1. Press the time delay button. Every time the
button is pressed, the time will be increased in
1-hour increments.
2. If you wish to shorten the time delay, keep on
pressing the time delay button until the time
delay you would like to set appears on the
screen.
Canceling the time delay
If you want to cancel the time delay countdown
and start the program:
1. Set the Time Delay to zero or turn the
Program selection knob to any program.
50 - EN