Mounting And Operation - Bosch Uneo Originalbetriebsanleitung

OBJ_BUCH-1695-004.book Page 13 Friday, September 2, 2016 3:45 PM
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or

Mounting and Operation

The following table indicates the action objectives for mounting and operation of the power tool. The instructions for each action
objective are shown aside. Depending on the type of application, various instruction combinations are required. Observe the
safety instructions.
Action
Removing the battery
Inserting the battery
Checking the battery charge
condition
Selecting the Application
Tool/Accessory
Inserting SDS-Quick Drilling Tools
Inserting application tools with
hexagon shank
Removing SDS-Quick Drilling Tools
Bosch Power Tools
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Figure Please observe
1
2
3
4
5
6
7
English | 13
Page
192
192
192
193
193
194
194
1 609 92A 351 | (2.9.16)