Coffee Grinder - Saeco Via Veneto Bedienungsanleitung

26
4.5 Priming
Before using the machine for the first
time, after the appliance has been left
unused for a long period or when the water
and steam have run out, it is necessary to
prime the machine.
• Turn on the main switch (3), the light on
the inside will be on.
• Point the steam tube ("Pannarello") over
the drip tray.
• Open the "hot water/steam" knob (6),
turning it in an anti-clockwise direction
and press the coffee switch (4).
• Wait until a steady stream of water flows
from the tube ("Pannarello").
• Press the coffee switch (4) again and close
the "hot water/steam" knob (6), turning
it in a clockwise direction.
The machine is now ready to make a perfect
cup of coffee.
5

COFFEE GRINDER

Warning! Turn grinding adjusting
handle only when the coffee
grinder is working.
Do not introduce ground coffee in the
coffee bean box.
Do not introduce any kind of
material, except for coffee beans.
The coffee grinder contains moving parts
which can be dangerous.
Do not introduce fingers and/or other
objects. Before any intervention inside the
coffee box, for any reason, turn off the
main switch and remove the switch plug.
Do not introduce coffee beans in the
coffee box when the machine is working.
Com004a 165925900 Rev01.pmd
• Remove the cover (11) of the coffee bean
box (12).
• Make sure that the box is clean, pour
milled coffee beans and close the box
with the cover (11).
The coffee quality and taste depend on the
blend, but also on the grinding level.
The machine is fitted with a handle (13)
designed to adjust the grinding level.
In order to adjust the grinding level, turn
the graduated handle when the machine is
working (the level is indicated by digits).
When manufactured, the machine is set to
a medium grinding level.
By setting the handle to smaller numbers,
the grinding level is increased, whereas it
lowers if the handle is set to bigger numbers.
Coffee with different grinding levels should
not be blended.
5.1 Coffee grinder operation/
• If the machine is off, turn it on by pressing
the main switch (3).
•
coffee filter-holder close to coffee output
conveyor (14), by introducing it into a
special fork.
Press by means of the coffee filter until
the coffee grinding switch (15) is
turned on.
• The coffee grinder starts working by
dosing ground coffee inside the coffee
filter-holder.
• Stop grinding ground coffee when the
desired quantity has been reached, by
pulling the filter-holder out of the fork.
26
COFFEE GRINDER
dosage
To start the coffee grinder, bring
Note. Dosage takes place
immediately and depends on the
13/07/2003, 18.30