Megasat HD 3 Kompakt Bedienungsanleitung Seite 25

2. Descriptions and key assignment
1. RF In
2. LCD Screen
3.
4.
5.
Function keys
6. Navigation
7. Menu
8. OK
9. Power
10. DC
11. Reset
Satellite signal input port, connects directly to satellite
antenna using coaxial cable.
Show the Menu
Red: the battery is being charged / Blue: battery is full.
The light will blink once the antenna connects shortly.
Power indicator: Indicate the device is power on or off.
F1: Turn LCD screen on/off.
F2: Activate / deactivate the key tones
F3: View Transponder controll in search menu
F4: No function
pq Navigation through the menu / channge values
t u Navigation through the menu / channge values
Enter or exit main menu.
In the menu, press OK to confirm selection.
Turn the meter on/off, press and hold for 2 seconds
to power on the meter.
Connection to the Power Supply or for Firmware Updates.
Reset the device to factory settings.
ENGLISH
05