Setting The Timer For The Auto-Off Function - Melitta CAFFEO SOLO & milk Bedienungsanleitung

Display
Flashing
•
Press the on/off button
→
All symbols in the display flash briefly for confirmation. The appliance is
ready for operation, the standby symbol
Note
Press the brewing strength button
saving standby mode. You can then immediately dispense coffee.

Setting the timer for the auto-off function

Additional information on auto-off function is provided on page 62. the timer is
factory-set to level 1 (1 hour).
Prerequisite: The appliance is ready for operation, the standby symbol
is illuminated.
Adjust the timer as follows:
• simultaneously press the button for coffee dispensing
ton for brewing strength
→ the standby symbol
•
Press the button for coffee dispensing
menu for the Auto-Off function.
→
the symbol for the drip tray
Time
5 minutes
(factory setting)
15 minutes
30 minutes
OFF
to confirm the selected time.
to wake the machine from energy-
for more than 2 seconds.
is flashing.
is illuminated.
is illuminated.
and the but-
three times to call up the
65