Preparing Coffee / Espresso - Melitta CAFFEO SOLO & milk Bedienungsanleitung

6 Preparing coffee / espresso

Prerequisite: The appliance must be ready for operation.
• Place one or two cups beside each other under the outlet.
•
Press the button for brewing strength
• turn the coffee quantity regulator (Fig.
quantity.
• Press the button for dispensing coffee
pare one cup.
• Press the button for dispensing coffee
you want to prepare two cups.
→ If you have pressed twice, the bean symbols flash twice in rapid succession
during dispensing to confirm.
→
the (double) grinding process and the dispensing of coffee will start. the
standby symbol
fill level set is reached.
• to stop dispensing coffee prematurely, press the button for coffee dis-
pensing
after starting dispensing before pressing the button again.
Notes
–
When the appliance is started up for the first time, the grinder will grind
longer than usual.
–
You can also adjust the cup fill quantity during the dispensing process.
to dispense less coffee, turn the coffee quantity regulator to the left to
the desired quantity, or turn it until the appliance stops dispensing. to
dispense more coffee, turn the regulator to the right.
will flash. Dispensing ends automatically when the coffee
. If you have pressed twice, wait for at least three seconds
to adjust the brewing strength.
A, no. 4) to adjust the cup fill
once if you want to pre-
twice in rapid succession if
57