Werbung
Verfügbare Sprachen
Verfügbare Sprachen
inside the openings in the soleplate.
∙ The steam output can be adjusted with
the steam control button or completely
switched off for dry ironing.
∙ For dry ironing, the water reservoir may
be empty. Should there be water left in
the reservoir, the steam jet function may
also be used when dry-ironing at higher
temperature settings.
∙ Place the steam iron upright on its base
stand after use and remove the plug from
the wall socket.
Automatic switch-off
If the appliance is switched on but not
being used for a certain period of time, it
will automatically switch off. The automatic
switch-off is indicated by a sequence of
6 beep signals; in addition, the indicator
light is fl ashing. As soon as the appliance is
moved, it will switch on again.
Horizontal position:
With the iron standing on its soleplate, it
will switch off after approx. 30 seconds of
inactivity.
Vertical position:
When upright on its base stand, the iron
will switch off after approx. 8 minutes of
inactivity.
Steam Jet
When the steam jet button is depressed, an
additional hot steam jet is emitted from the
soleplate. This function can be very useful
when the regular amount of steam emitted is
not suffi cient to remove stubborn creases or
when ironing diffi cult or thick fabrics.
The steam jet function may also be used
with the iron held vertically, to remove
creases or wrinkles from fabrics.
Using the Spray Nozzle
The laundry can be dampened by pressing
the spray button. This will help to smooth
out diffi cult areas. The spray nozzle may be
used at any temperature level during dry or
steam ironing.
Cleaning and care
∙ Before cleaning the appliance, ensure it is
disconnected from the power supply and
has cooled down completely.
∙ To avoid the risk of electric shock, do not
clean the appliance with water and do not
immerse it in water.
∙ If necessary, the unit may be wiped with a
dry fuzz-free cloth.
∙ Starch, fat and other deposits on the
soleplate may be removed with a woollen
cloth soaked in a vinegar-water solution.
∙ Do not use abrasives or harsh cleaning
solutions.
∙ Do not put vinegar or other descalers into
the water reservoir.
Self-cleaning system
The self-cleaning system fl ushes out loose
mineral deposits and keeps the appliance
free of lime and dust particles. Self-cleaning
should be performed if the iron has not
been used for an extended period of time,
or otherwise every 10-15 days. Proceed as
follows:
∙ Half-fi ll the water reservoir with water.
∙ Place the iron on its base stand and insert
the plug into the wall socket.
∙ Set the temperature control to its
maximum.
∙ Turn the steam control button to its 'dry
ironing' position (
).
13
Werbung
