HomeMatic KeyMatic HM-Sec-Key Bedienungsanleitung Seite 41

"Unlocked" setting:
Briefly press the button "Unlock", the drive moves 90 degrees with each
press of the button toward "Unlock" (this move can be made multiple times).
Briefly press the button "Lock", the drive moves 90 degrees with each press
of the button toward "Lock" (this move can be made multiple times).
Briefly press the button "Setup", the display shows "3" for menu point 3
("Locked" setting).
The initialization move in the direction of "Locked" begins. This procedure
is only performed one time, unlike the unlocking initialization move. In this
case, fine-tuning is possible in 90 degree steps as well (if whenclosing,
only "1 x Locking" is desired for instance). This saves battery capacity and
enables faster locking and unlocking.
"Locked" setting:
Briefly press the button "Unlock", the drive moves 90 degrees with each
press of the button toward "Unlock" (this move can be made multiple times).
Briefly press the button "Lock", the drive moves 90 degrees with each press
of the button toward "Lock" (this move can be made multiple times).
Press the button "Setup", the move to programmed setting "Unlocked" is
started. The display shows "4" for menu point 4 (setting "holding time for
door latch"). The unlocking symbol flashes.
The holding time for the door latch can be set for the "Open door" function
now. In this case, note that the extended holding time also increases battery
consumption.
41