Herunterladen Inhalt Inhalt Diese Seite drucken

HomeMatic KeyMatic HM-Sec-Key Bedienungsanleitung Seite 36

Vorschau ausblenden Andere Handbücher für KeyMatic HM-Sec-Key:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Remove the base fastener from the door lock drive.
Make sure that the nuts remain in the base fastener.
Put the base fastener (2) on the protruding part of the lock cylinder (door leaf (1)).
Fasten the base fastener with the screw (1) on top and bottom on the lock cylinder.
In certain cases, the base fastener can also be fastened to the door with two wood-
screws (2).
These two screws will damage the door leaf or the door fittings however.
This could lead to losing the rent deposit or damage deposit when dealing
with rental properties.
Normally, the two screws on the top and bottom of the base fastener are sufficient
for fastening the door lock drive.
36

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Keymatic hm-sec-key-sKeymatic hm-sec-key-o

Inhaltsverzeichnis