Nilfisk VU500 12 EU Betriebsanleitung Seite 10

Do not allow the supply cord to come into contact with
the rotating brushes.
Emptying the cloth dust bag
Cleaning the pre filter
Deodorizer pad
Specifications
Rated power
Protection grade (moist., dust)
Protection class (electrical)
Airflow with hose and tube
Suction power with hose and tube
Sound pressure level L
Sound power level L
WA
Vibration ISO 5349 a
h
Main filter, surface area
Dust bag capacity
Weight
Specifications and details are subject to change without prior notice.
10
WARNING
1. Disconnect the power cord from the electrical outlet. Pull the Dust
lid button and drag the Dust lid outwards to remove it from the
cleaner.
2. Push downwards at the edge to the left of the plastic holder, so that
the bag inlet loosens from the vacuum inlet of the machine.
3. Grasp at the plastic flange of the bag and gently pull the bag out-
wards - away from cleaner.
4. Remove bag clip and shake out bag contents.
5. Put the bag clip back on the bag.
6. Insert the cleaned/new cloth bag into the slot of the bag holder and
push the bag in place so that bag is secured.
7. Push the bag holder with the new bag upwards, so that the bag
inlet fasten to the inlet of the machine. Make sure that the bag is
unfold and will fit in place at the bag housing. Also check that the
"no bag" clip is placed to the left so that the lid will be able to close.
8. Fit the two notches of the back cover to the two slots at the lower
part of the bag housing, and push the back cover back in place at
the housing.
The pre filter may be washed in warm water. Let the filter dry complete-
ly before putting it back into the filter holder.
This machine is equipped with a deodorizer pad. It's located in the pre
filter holder. Replace it when the function begins to fade.
(IEC 60335-2-69)
PA
(IEC 60335-2-69)
VU500 12 EU VU500 15 EU
W 1000
V IP 20
W II
litres/sec 44
W 130
dB(A) 73 ± 2
dB(A) 79 ± 2
m/s
2 ≤ 2,5
cm 196
2
litres 3,5
kg 8
Original instruction
1000
IP 20
II
44
130
73 ± 2
79 ± 2
≤ 2,5
196
3,5
8,5