Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Please refer to the instructions under "Installing/Replacing the lamps".
Replacing the fuse
If the lamp burns out, the fine-wire fuse of the device might fuse, too. Only replace the fuse by a fuse of
same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuseholder on the rearpanel with a fitting screwdriver from the housing (anti-
clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
Suitable lamp:
Maximum ambient temperature T
Maximum housing temperature T
Min. distance from flammable surfaces:
Min. distance to lighted object:
Fuse:
Base dimensions (DxH):
Total height:
Weight:
Accessories:
OMNILUX GU-10 230V/35W 1500h + C
OMNILUX GU-10 230V/35W 1500h blue
OMNILUX GU-10 230V/35W 1500h red
OMNILUX GU-10 230V/35W 1500h green
OMNILUX GU-10 230V/35W 1500h yellow
OMNILUX GU-10 230V/35W 1500h violet
OMNILUX GU-10 230V/35W 1500h orange
Please note: Every information is subject to change without prior notice. 14.11.2012 ©
230 V AC, 50 Hz ~
110 W
3 x GU-10, 230 V/35 W
:
45° C
a
(steady state):
70° C
C
0.5 m
0.5 m
F 1 A, 250 V
263 x 118 mm
1070 mm
1.7 kg
No.
88541505
88541506
88541507
88541508
88541509
88541510
88541511
16/16
00053960.DOC, Version 1.0
Werbung
Inhaltsverzeichnis
