Pkm GK 225.4 A+ Bedienungsanleitung Seite 47

The plug of the appliance is not
connected to the socket.
The plug has become loose.
The socket is not supplied with
energy.
The fuse is switched off.
The voltage is too low.
Incorrect energy supply.
The appliance has been switched off
for a while.
Too much or too hot food in the
appliance.
Doors opened too often or too long.
The door was frequently opened.
The door is not properly closed.
Encrusted ice inside the appliance.
The current temperature setting is
too warm
Warm or hot food inside the
appliance.
The appliance is overfilled.
The door seals are damaged.
The door is not properly closed.
The door seal is damaged or soiled.
The door makes a strange sound when opened.
The door seals are soiled.
If the appliance shows a malfunction not noted on the schedule above or if you
have checked all items on the above schedule but the problem still exists, please
contact the shop you purchased the appliance at.
The operating procedures described below are normal
The refrigerant generates a sound similar to flowing water.
Sometimes you may hear a sound which is generated by the injection process
of the cooling circuit.
Some humidity may accumulate outside the appliance, especially in a moist
The compressor does not work at all.
The compressor operates for too long.
Unsatisfactory cooling capacity.
Strong formation of encrusted ice.
and do not indicate a malfunction.
Check the corresponding socket by
connecting it with another appliance.
Check the fuse box.
Compare the data on the model
plate with the data of your energy
supplier.
Check the energy supply.
The appliance needs some time to
reach the preset temperature.
Remove any hot food.
Do not open the door too often/too
long.
Select a different setting if necessary.
Check the door/door seals.
Defrost the appliance.
Close the door.
Clean/replace the door seal.
Clean the seals.
47