Converting From Cp 5611/ Cp 5611 A2 To Cp 5621 - Siemens SIMATIC NET CP 5621 Betriebsanleitung

Converting from CP 5611/ CP 5611 A2 to CP 5621

The CP 5621 can be used as a replacement for the CP 5611 or CP 5611 A2. This requires
neither software updates nor changes to the configuration.
Follow the steps outlined below:
1. Turn off the PC.
2. Remove the CP 5611/CP 5611 A2.
3. Install the CP 5621 in a PCI Express slot.
4. Restart the PC.
5. Configure the CP 5621 just as the previous CP 5611/CP 5611 A2.
Note
When the Windows hardware wizard appears, confirm the proposed steps (except for
searching for new hardware drivers on the Internet).
Note
The configuration used for the CP 5611 or CP 5611 A2 needs to be reloaded.
CP 5621
Operating Instructions (Compact), 02, A5E01156749
Converting from CP 5611/ CP 5611 A2 to CP 5621
6
11