Introduction - Siemens SIMATIC NET CP 5621 Betriebsanleitung

Introduction

Introduction
1.1 Introduction
Content of the document
These operating instructions (compact) contain the information you require to install and
commission the CP 5621 communications processor.
Further information on the CP 5621
Table 1-1 Structure of the documentation for the CP 5621
Name of the document
Operating Instructions (compact)
CP 5621
Configuration Manual
Commissioning PC Stations
Manuals
• SIMATIC NET Industrial Communication with PG/PC
Part 1 – Basics
SIMATIC NET Industrial Communication with PG/PC
•
Part 2 – Interfaces
Installation Instructions
SIMATIC NET, PC Software
(German and English)
Further documentation
You will find further information on the current Manual Collection DVD
Order number 6GK1975-1AA00-3AA0
4
Why you should read it
This provides a step-by-step guide to installing the CP 5621
in your PC.
This contains the information required to commission and
configure a PROFIBUS communications module.
This manual introduces you to industrial communication and
explains the available communication protocols. It also
describes the OPC interface as a user programming
interface.
This document provides you with the information required to
install the SIMATIC NET PC software products on your
PG/PC.
Operating Instructions (Compact), 02, A5E01156749
1
CP 5621