Installing And Uninstalling The Driver; Installing The Driver; Uninstalling The Driver - Siemens SIMATIC NET CP 5621 Betriebsanleitung

Installing and uninstalling the driver

Installing and uninstalling the driver
3.1

Installing the driver

Requirements
The following requirements must be met:
● The plug-and-play manager is enabled in the BIOS.
Installing the CP 5621 driver
The driver is installed automatically when you install the "SIMATIC NET PC Software" CD or
the STEP 7 program.
The CP 5621 has been tested and released as of the "SIMATIC NET, PC Software, Edition
2006" CD.
For the STEP 7 version released for the CP 5621, refer to the STEP 7 readme file.
3.2

Uninstalling the driver

Uninstalling the CP 5621 driver
The driver is uninstalled automatically when you uninstall the "SIMATIC NET PC Software"
CD or the STEP 7 program.
Note
When you uninstall STEP 7, keep to the following instructions in German or English:
http://support.automation.siemens.com/ww/view/de/189025
http://support.automation.siemens.com/ww/view/en/189025
8
3
CP 5621
Operating Instructions (Compact), 02, A5E01156749