Grinding
cylinder
Grinding cone Clean cuticles area
SWITCHING THE DEVICE ON AND OFF
• To switch the device on, slide the On/Off switch into the desired
position. There are two speeds that may be selected in each direction
of rotation (R1, R2, L1 and L2).
• To switch the device off, slide the On/Off switch into the - - position.
Position
R2
R1
- -
L1
L2
CLEANING AND CARE
• Clean the product on the outside with a soft, dry cloth. If necessary,
use a slightly moistened cloth to clean the housing. Dry the housing
carefully afterwards.
• Clean the attachment after every usage. Remove the attachment from
the device before cleaning.
• Do not immerse the device into water while cleaning.
NC-28_A6_160329.indb 16
For more detailed surface filing
and gently exfoliates cuticles
Function
High speed, clockwise
Low speed, clockwise
Off mode
Low speed, anti-clockwise
High speed, anti-clockwise
16
29/3/16 9:49 AM