Cleaning And Maintenance - Ideen Welt LS-201 Bedienungsanleitung

CLEANING AND MAINTENANCE

You may clean the device under running water while holding it.
Caution! Make sure that no liquids get inside the product. Anyhow, if
water got inside the product let the product check by a specialist before
using it next time.
For a shave that is always smooth, the device must be cleaned and
maintained on a regular basis.
1. Press down on both unlock buttons
and remove the shaving head.
2. Carefully tap the shaving head
(Fig. 3).
3. Clean the cutter block with the
cleaning brush.
4. Rinse off the cutter block and the
shaving head under cold running
water.
5. The attachment can be rinsed with warm water, mixed with a little
mild soap.
6. Allow all the pieces to thoroughly dry.
7. Clip the shaving head on the device in such a way that it locks into
place. Note that the shaving head only fits correctly in one position.
8. You can store the product in the device holder. The device holder
can be attached, e.g. to a hook.
LS-201_A6_160728.indb 18
Fig. 3
18
28/7/16 2:06 PM